Bellacor Table Lamps | Have you ever necessary to pull your table lamp apart, perhaps to switch a globe or perhaps a damaged socket, only to find out which you have no idea how you can put it together again again? Whilst they may look terribly complicated, these kinds of lamps can in fact be quite easy to piece together again.
Step 1: Place the beds base onto a designated work surface then the body; the beds base often comes with a hole in the middle, which is for your power cord to visit from, whilst the body should have an opening at either end.
Step 2: Slide the rod to the top hole of the body, out there the lower hole and into the beds base. Put a washer in the end from the rod and screw into place. Then, thread the cord to the bottom from the rod and out over the top. Screw within the neck (when the table lamp has one) and also the harp.
Step 3: Place the socket cap over the lower from the harp and screw to the rod, ensuring that it does not take right way up. Wrap the ‘hot’ wire throughout the gold screw around the socket and wrap the ‘neutral’ wire throughout the silver screw.
Step 4: Place the socket shell in the bulb socket, ensuring that that you tuck the cords inside. Squeeze the ends from the harp and slide them to the bottom from the shell, then screw a bulb in.
When putting your table lamp together, you will need to remember that there could be additional or even less steps depending around the type. If you become stuck when trying to place your lamp together again, you need to contact a lighting specialist or even the manufacturer to ask for their advice.