Tall Glass Table

Tall Glass Table | Have you ever had to pull your table lamp apart, perhaps to switch a globe or a damaged socket, only to find out that you’ve no idea how to put it back together again again? Whilst they may look terribly complicated, these types of lamps can actually be quite an easy task to piece back together again.

Step 1: Place the beds base onto a flat work surface accompanied by your body; the beds base often incorporates a hole in the middle, that’s for the power cord traveling beyond, whilst your body must have a hole at either end.

Step 2: Slide the rod in the top hole of your body, out there the bottom hole and into the beds base. Put a washer within the end of the rod and screw into place. Then, thread the cord in the bottom of the rod and out over the top. Screw in the neck (in the event the table lamp has one) along with the harp.

Step 3: Place the socket cap over the bottom of the harp and screw to the rod, making certain it is the correct way up. Wrap the ‘hot’ wire throughout the gold screw on the socket and wrap the ‘neutral’ wire throughout the silver screw.

Step 4: Place the socket shell within the bulb socket, making certain that you tuck the cords inside. Squeeze the ends of the harp and slide them in the bottom of the shell, then screw a bulb in.

See also: Lamp With Attached Table

When putting your table lamp together, you will need to take into account that there might be additional or even less steps depending on the type. If you become stuck when attempting to place your lamp back together again, you ought to make contact with a lighting specialist or even the manufacturer to inquire about their advice.